Engineers weld nanowires with light

ScienceDaily (Feb. 6, 2012) ? At the nano level, researchers at Stanford have discovered a new way to weld together meshes of tiny wires. Their work could lead to innovative electronics and solar applications. To succeed, they called upon plasmonics.

One area of intensive research at the nanoscale is the creation of electrically conductive meshes made of metal nanowires. Promising exceptional electrical throughput, low cost and easy processing, engineers foresee a day when such meshes are common in new generations of touch-screens, video displays, light-emitting diodes and thin-film solar cells.

Standing in the way, however, is a major engineering hurdle: In processing, these delicate meshes must be heated or pressed to unite the crisscross pattern of nanowires that form the mesh, damaging them in the process.

In a paper just published in the journal Nature Materials, a team of engineers at Stanford has demonstrated a promising new nanowire welding technique that harnesses plasmonics to fuse the wires with a simple blast of light.

Self-limiting

At the heart of the technique is the physics of plasmonics, the interaction of light and metal in which the light flows across the surface of the metal in waves, like water on the beach.

"When two nanowires lay crisscrossed, we know that light will generate plasmon waves at the place where the two nanowires meet, creating a hot spot. The beauty is that the hot spots exist only when the nanowires touch, not after they have fused. The welding stops itself. It's self-limiting," explained Mark Brongersma, an associate professor of materials science engineering at Stanford and an expert in plasmonics. Brongersma is one of the study's senior authors.

"The rest of the wires and, just as importantly, the underlying material are unaffected," noted Michael McGehee, a materials engineer and also senior author of the paper. "This ability to heat with precision greatly increases the control, speed and energy efficiency of nanoscale welding."

In before-and-after electron-microscope images, individual nanowires are visually distinct prior to illumination. They lay atop one another, like fallen trees in the forest. When illuminated, the top nanowire acts like an antenna of sorts, directing the plasmon waves of light into the bottom wire and creating heat that welds the wires together. Post-illumination images show X-like nanowires lying flat against the substrate with fused joints.

Transparency

In addition to making it easier to produce stronger and better performing nanowire meshes, the researchers say that the new technique could open the possibility of mesh electrodes bound to flexible or transparent plastics and polymers.

To demonstrate the possibilities, they applied their mesh on Saran wrap. They sprayed a solution containing silver nanowires in suspension on the plastic and dried it. After illumination, what was left was an ultrathin layer of welded nanowires.

"Then we balled it up like a piece of paper. When we unfurled the wrap, it maintained its electrical properties," said co-author Yi Cui, an associate professor materials science and engineering. "And when you hold it up, it's virtually transparent."

This could lead to inexpensive window coatings that generate solar power while reducing glare for those inside, the researchers said.

"In previous welding techniques that used a hotplate, this would never have been possible," said lead author, Erik C. Garnett, PhD, a post-doctoral scholar in materials science who works with Brongersma, McGehee and Cui. "The Saran wrap would have melted far sooner than the silver, destroying the device instantly."

"There are many possible applications that would not even be possible in older annealing techniques," said Brongersma. "This opens some interesting, simple and large-area processing schemes for electronic devices -- solar, LEDs and touch-screen displays, especially."

This research was supported by the Center for Advanced Molecular Photovoltaics (CAMP) at Stanford University funded by King Abdullah University of Science and Technology (KAUST).

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

---

Story Source:

The above story is reprinted from materials provided by Stanford School of Engineering. The original article was written by Andrew Myers.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.

---

Journal Reference:

1. Erik C. Garnett, Wenshan Cai, Judy J. Cha, Fakhruddin Mahmood, Stephen T. Connor, M. Greyson Christoforo, Yi Cui, Michael D. McGehee, Mark L. Brongersma. Self-limited plasmonic welding of silver nanowire?junctions. Nature Materials, 2012; DOI: 10.1038/nmat3238

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

Source: http://www.sciencedaily.com/releases/2012/02/120206092633.htm

google ice cream sandwich jason campbell android ice cream sandwich shia labeouf teleprompter ashley greene mukesh ambani